2026-11-12
what i've been up to
diary · 3d · electronics
Hello everyone and welcome back, i’m sorry for kind of disappearing for a while, i know some of my friends read this and they already know why i’ve been busy, i started my masters at UNIBO yay ! so far so good i have yet to take the first exam of this year so i’m still skeptically optimistic but so far so good, the lectures are great, at least some of them, and i’ve discovered i am quite fond of Computer Vision, it is a really interesting topic and i would like to get really knowledgeable about it! And it might even be a good candidate for my thesis, i even started writing some for my self in haskell and i have to say that functional languages really deliver when it comes to this sorts of stuff.
in other news
I have also been busy with a couple of projects so far, i am also slowly transitioning back to Debian because i really miss Linux and it’s simplicity and especially it’s battery consumption to be honest, with windows 11 my battery can’t get past a 3 hours lecture just taking notes. This month i’ve been really missing home, i am struggling to make friends who share my same interests in person, online is good tho, no shortage of nerds there. So to combat this i have decided to take part and visit Hack or d(A/I) (i missed a day because i’m an idiot and thought it was friday through sunday but it was thursday to saturday) today i will go and i really hope to make some good friends, yes i know that i do know a lot of people online who share my interest but when it comes to hardware hacking being in person is best imo.
what i’ve been up to
so i haven’t done a lot but i find that the quality of what i did is remarkable, at least for my standards
Printables vices design challenge
this month’s designer challenge on printables are Vises (and other work holding solution) so i tried my best to come up with something creative, but first i checked out the competition and two models caught my eye: - normally closed clamp by NomeUn here is my make - pocket size third hand mini spring loaded vise by Rjun here is my make
i’m not going to deep in why those caught my eye, you can check my make for that, but mainly because i saw the vision of the designers, and i felt like it really fitted me: - easy to print, all printed - useful and versatile - quick to print - clean design, no overcomplication
so with this objectives in mind i came up with two models, i know, shocker.
PCB thread Vise
this was my first idea, it came to me because i needed something to hold a motherboard that my girlfriend (hiii) was throwing away and i thought i could fix it (more on that in the upcoming week hopefully) and so keeping in mind my keypoints i opened fusion and i came up with this:

and it looked pretty good, if i can say so myself. Basically is just a empty cylinder with a thread on knurled cap and it works by pinching the board between the cap and the body, you can put stuff in it to make it heavier and when not in use it can double as storage so it doesn’t take up useful space on your desk, i found that putting the copper sponges to clean the tip of soldering irons is also quite a good idea which was suggested to me by my roommate. This model has also gained quite a traction with 50 likes and 60 downloads which for me is crazy, it is my best model so far
fully 3d printed butt clamp
this is also a design that came out of necessity, some of you may be aware that i built myself a custom keyboard and i needed a way to join the 2 case parts together so i came up with this
if some of you are welders and have worked with sheet metal you will recognize this design immediately, basically how it works is that you can uncouple the straight bar at the end from the thin plate connected to the screw, than you can slide said plate between 2 plates that are butting against each other (hence the name), you then slide the bar through again and tighten it holding the two plate parallel and with a small gap between each other, you can than weld them together, or glue them, or whatever, i technically soldered them together since they were 2 pla parts and so i used my pinecil and some filament to fill the gap and join them together, and it worked great, here is a picture

and that was basically it, i am working on some other stuff but i’m yet not really happy with the result since it is mainly cuckcoded and it needs polishing, but it is a really good idea soo when i have it polished it’s definitely going to be posted here, to do a quick spoiler, it is basically a poor mans buspirate, if that does not hype you i don’t know what would eheh. See you all around ladies, gentlemen and nonbinary cyborgs, thank you for your time!